Flush Mount Lighting: the Quintessential Ceiling Lights

A flush mount light is ideally a dome-shaped light fixture that is mounted flush to the ceiling. The embellishing flush-mount light is attractive and the base of the light extends just underneath the ceiling. Style-wise, flush mount lights can echo the effects of pendant lights, the only difference is that they are not low hanging fixtures.

The ideal places for installing a flush mount light fixtures are the living room and the foyer. These areas are the ones that create the 1st impression of your house. This form of lighting is best suited for both casual and formal interiors.

They are also preferred in rooms with low ceilings to provide the home with ambient light. Additionally, being suspended from the centreSuspended from the centre of a room, flush mount lighting fixtures are ideal for providing general, overall illumination. Flush mount lighting fixtures are great for use in bedrooms, bath areas, and kitchen spaces.

Home DIY renovation projects are given a fresh lease of life by the aesthetics, which are rendered by these fixtures. Among the superfluity of ceiling lights, it does become overwhelming to find the right fit for your home. There are innumerable websites and stores dedicated to inspiring homeowners and aesthetic junkies with ceiling lights ideas.

Just like a wall facade ceiling lights too could do use a facelift. For the individual looking forward to making a bold statement with their ceiling lights, a chandelier is an effortless way to introduce a swank and plush look into your desired space. May it be please noted bulbs with too high wattage could result in disapproving outlines.

Thus before installing, it is strongly recommended that the interested individual or individuals should seek assistance from an experienced interior designer. The placement, height, and wattage would be easily determined by the aforesaid.Coming up next is track lighting design.

This kind of lighting has gained currency among the homeowners since it consumes less space and can be installed without much hassle. This sort of ceiling light is meant for rooms that have the least inlet to natural lighting and renders the homeowner the liberty to adjust the bulbs to achieve the right combination of light directions. The downside of such fixtures is that it needs to be operated simultaneously.

It is highly recommended that the track lighting should be supported with additional lighting as well. Light fixtures that come under the purview of pendant lighting are fixed to the ceiling with a chain, cord or road. Either single fixtures could opt or multiple fixtures could be chosen.

Homeowners have both the options. This type of Ceiling light comes in a myriad of designs; it is also a great option for those who would like to impart a certain sense of sophistication to their beloved home. One of the greatest advantages of these fixtures is that they are easy to clean.

Since the light emitted by this sort of fixtures is not so bright, they are most effective when they are combined with another kind of fixtures.Cairo Glitz is an Online Showroom of all the modern & stylish Light. We have Variety of products including ceiling, wall lights & all the stylish light collection.

published at RELATED QUESTION What is proffesional led stage lighting? When you're putting on an occasion, whether it is an unassuming school play or a party, stage lighting rental is an unquestionable requirement. Lighting is a main thrust of your production, giving brightening, center, detail and modifying the view of the group of audience.

There is nothing that so vitally passes on an inclination superior to a decent lighting system, and with boundless inventive potential, will serve as an immense advantage for your creation. Focus, position and hanging: Conventional stage lighting must be set up because of these three contemplations. Focus refers to where the light will point; position alludes to where the light will start from; hanging refers to the real demonstration of hanging the light.

Shading, force and example (assuming any) should be considered next. Types of stage lighting : Ellipsoidal - these lights are the conventional stage lights and thought to be the most critical. They are centering lights, the appearance in front of an audience of which can be adjusted by screens and channels.

Fresnel - these lights are utilized for shading washes on the stage. Standard Jars - these lights are the sort you will see in even the dingiest of bars. Continuously a strong choice, standard jars can get hammered, are sturdy and simple to transport.

Follow spots - these are spotlights used to pursue somebody around a phase. Obviously, there are increasingly choices accessible for stage lighting with the consistent progress of innovation. Presently you have the fundamentals; here are a couple of more alternatives: LEDs - these Professional LED Stage Lighting are useful for centered pillars and have been gradually supplanting conventional globules in stage lighting.

Dizzies - these lights are round circles with a few Drove lights (more often than not of varying hues) covering the surface. The circle pivots in an assortment of bearings and examples, making a whirling, confounding example, consequently the name. Gels - this term alludes to the hues given to lights.

They function as shading channels, and should work in congruity with the shade of the light itself to accomplish the craved impact. Once you have got your types of lighting down, you'll have to consider where to place them. Here's an essential summary of lighting positions: Front - This is utilized for the most part for perceivability and shading impacts.

Side - can be utilized to awesome impact to complement activity. Back - Additionally utilized for impact. This kind of lighting can make the dream of profundity on a phase, or notwithstanding to silhouette a man totally.

HOT PRODUCTS
沒有數據
GET IN TOUCH WITH US
推薦的文章
LED Semi-Flush Mount Ceiling Lights Gives Excellent Illumination to the Home Spaces
Any house or office area is incomplete if a beautiful light fixture isnt installed. Therefore to brighten up your foyer or any room space that gives a gloomy effect, it is important to find LED semi-flush mount ceiling lights for great looking interiors. The lights are designed in such a manner that offers rooms just the right kind of effect required to brighten-up the spaces. The LED semi-flush mount ceiling lights are best in every way possible. Not just it gives a flushed look to the overall ambiance but also make it look brighter.With an array of ceiling lights available online, you can choose the right kind of lights depending upon the unique requirements of your homes. Each light fixture is designed keeping modern art in mind so that it adds the unique element to the entire house.Why would you need a Good Light Fixture?Seeking perfect light options is difficult but not impossible. Choosing a different kind of light fixture depends upon several factors. The foremost thing that one must take care of is where exactly the light is mounted. Check for the direction of your lights in the room. This will help to you a detailed idea about which all lights would look fancy at specific spaces. Next thing that one should always check for is the size of a light fixture. Checking for the size is important because it would help you get an idea about the appropriate space, which the light will occupy. Too much bulky lights with fewer spaces wont work well and vice-a-verse. What is LED lights offer and Regular Lights Dont?The first thing that makes LED lights best to use are that they are energy efficient. They provide the perfectly lit ambiance that was missing until now. The lighting styles can be used for decoration on various parts of residential and commercial facilities. Each fixture offers immense light in hallway, bedroom or foyer to make it look lighted up.Get all the lights from the reputed online portals for a hassle-free shopping experience. The quality checks are done to keep the products intact before theyre sent to you to the doorsteps. Several companies offer flush and semi-flush lights at lucrative deals for all of you to check out online. Buying LED flush mount and semi-flush mount lights has been one of the favorite things customers prefer to enhance the look of their interiors.Summary flush mounts and semi-flush mounts enhance your home interiors making it look beautifully lit spaces. RELATED QUESTION Were can I get quality outdoor LED lighting for my landscape project? If short maintenance, eco friendly landscape lighting is a precedence for you, outdoor LED lighting is a ideal option for your landscape lighting design. LED landscape lighting offers the protection, security and artistic qualities as any other landscape lighting solution, but it also offers a concentrated ecological footprint and lower maintenance. You can emphasize the beautiful architecture of your homes external or landscaping with tactically placed outdoor lighting by LV Lightings. While your options may seem endless, its significant to believe the role you want your outdoor lights to play. Will they be for security reasons, or for more ornamental purposes? Outdoor LED lighting may be more luxurious up front than other options, but in the long run it will go easier on your wallet than other bulbs. From LV Lightings LED lights have a long life span and offer excellence lighting that is power efficient. Whatever options you settle on, youre sure to find a extensive selection of charming and well-designed landscape lighting right here on LV Lightings.
LED Semi Flush Mount Ceiling Lights for Brightened Up Spaces
If youre looking forward to add a light fixture to brighten up your foyer, add a glistening effect to the bedroom or set the right tone of light in the closet area, the LED semi flush mount ceiling lights make up for the best options. Even installing the LED semi flush ceiling lights would give the entire ambiance a flushed look that looks great. With an array of ceiling lights available online, you can choose the right kind of lights depending upon the unique requirements of your homes. Factors that Help in Selecting the Right Kind of Lighting FixtureSelecting a unique style of light fixture depends upon many factors. One of the prime ones include where you wish to install it such as the direction of your lights in the room would help you analyze the designs better. Also, diffusion opaque versus clear shades), size, the output of light, and more play equally important role in selecting a perfect lighting fixture. Obviously, too many choices may be confusing this is why you must go through certain ideas to make well-informed decisions.Understand the difference between LED Flush and Semi Flush LightsTaking up the LED flush lights first, they are the usually mounted very close to the ceiling, which enables a perfect lighted ambiance just as you imagined it to be. These lighting styles can be used for decoration or utilitarian in purpose. Install the lights in hallway, bedroom or foyer and make it work for the perfect lighting that it spreads in the rooms. The LED flush lights are often dome shaped and look fabulous in rooms with low ceilings of below 8 feet. Extremely versatile to work with, these lights are something, which every household installs for a great lighting effect. The second category of light is the LED semi flush lights. Now, these are mounted slightly lower than the flushed lights. If you have high ceilings, semi-flushed LED lights would do a great job. So, if you have ceilings above 8 feet, opting for semi flush mounts will help in enhancing the interiors of the homes. Also, there is an endless range of styles and designs in the semi flush category, so that you can make your picks accordingly.Online Portals are the Best Sources of LED Flush and Semi MountsCheck out some great deals available online portals dealing in flush and semi-flush lights. The reputed portals allow customers to explore from a wide array of designs and place orders right away. Each light fixture is quality checked before it reaches your doorsteps to avoid hassle-free shopping. So, buy LED flush mount and semi-flush mount lights and give a unique definition to your homes. Summary flush mounts and semi-flush mounts look amazing when installed in homes. Buy some unique fixtures online and have it delivered to the doorsteps RELATED QUESTION Should I get HID or LED headlights? Why? I'll tell you, my choice is LED headlights.The following is my understanding of HID and LED.Advantages of Xenon Lamp1. The color temperature of xenon lamp ranges from 3000K to 12000K, of which 3000K is pure yellow, with the strongest penetrability in rainy and foggy days. 4300K white to yellow, is the most comprehensive color temperature in rain, fog, sunny days and many road conditions (this is the standard for the original high-grade cars).5500K is the most natural color that is slightly white and close to sunlight.The 6000K color temperature contains more blue components, thus presenting blue and white light. Simply put, the higher the color temperature, the whiter the color, and the poorer the relative penetration, the shorter the illumination distance.2. HID is three times higher than halogen lamps in brightness efficiency, which has an obvious effect on improving the visibility of driving at night and in fog.3. Xenon lamps emit more than 2 times the luminous flux of halogen lamps. At the same time, the efficiency of converting electric energy into light energy is also increased by more than 70% compared with halogen lamps. Therefore, Xenon lamps have a relatively high energy density and illumination intensity.4. Save 1/2 of electricity. Halogen lamps consume more than 60W of electricity while xenon lamps only need 35W of electricity. 5. Since xenon lamps have no filament, the problem of scrapping due to filament breakage will not occur. The service life of xenon lamps is much longer than that of halogen lamps. The service life of xenon lamps is equivalent to the whole operation time in the average service life of automobiles. 6. Xenon lamp will not go out instantly in case of failure but will go out (or light up quickly) by gradually darkening, so that drivers can gain time in driving at night and pull over in an emergency.Disadvantages1. The requirement of a light-gathering is high. Special xenon lamps must be used. There are two factors for not gathering light. (1) The mismatch between bulb and lamp leads to, for example, installation of xenon lamp light source for lamps using halogen lamp light source; (This is also why it is not effective for car owners to change xenon bulbs directly. )(2) Bulbs and lamps are not properly installed, and the focus is not properly adjusted, which requires professional and experienced light distributor.2. Some models with the self-checking function will have fault lights on when they are installed because the bulb power of the original car is high (55W) and the power of the xenon lamp is low (35W), so the modified car will give an alarm when its power is not enough. As a xenon lamp, its starting instantaneous current is 8A, while the original car was started at 6.2A, so the circuit settings of the original car do not match. Professional installers are required for decoding and matching. 3. The quality of the product is not up to standard. Incorrect installation may cause electromagnetic interference. This requires a professional installation technician to install. Advantages of LED Lamps1. Long service life, generally up to tens of thousands or even hundreds of thousands of hours. In the future, LED will be used for automobile lighting lamps, and lamps will not need to be replaced throughout the service life of the automobile.2. High efficiency and low energy consumption. The LED light source can directly produce red, amber and other colors required by automobile lamps without color filtering, without loss, and the utilization rate of electric energy is as high as over 80%.3. The light quality is high and belongs to environmental protection products. Basically, there is no radiation and "green" light source. 4. LED has a simple structure, internal support structure, and is sealed with transparent epoxy resin around, with good seismic performance. 5. No delay in lighting, fast lighting response speed (nanosecond), suitable for objects with fast-moving speed.6. It is suitable for low voltage operation and can be completely applied to automobiles. 7. LED occupies a small volume. Designers can change the lamp mode at will, thus diversifying the car shape. Automobile manufacturers favor LED, which is completely determined by the advantages of LED itself.Of course, compared with xenon lamps, LED lamps also have the following disadvantages1. The requirements of lamps are extremely high-since the requirements of lamps are more stringent at the single point of the light-emitting focal plane, this problem is also the reason why the lighting effect of LED lamps is most affected.2. High cost-Take LED reversing lamps as an example. One LED reversing lamp is close to 30 yuan, while the price of one bulb is only 5 yuan, most of which is the cost of LED lamps. High prices cause ordinary cars to be unable to install LED lights and the market cannot be popularized.3. The difficulty in popularizing LED car headlights is due to the fact that the LED light source is installed in a relatively sealed headlamp assembly, which has poor heat dissipation and easy light attenuation due to poor heat dissipation treatment, thus affecting the service life of the headlamp.4. There is no unified industry standard and the quality of products is uneven. 5. It is difficult to design a light type. Because the vehicle lighting is different from the domestic lighting, the width, range and range requirements of the vehicle lighting are much higher than those of the domestic lighting.In general, xenon lamps and LED lamps have their own advantages and disadvantages. Judging from the matching of current light sources and lamps, if the lighting effect is the final judgment standard, the effect of HID xenon lamps is obviously higher than that of LED lamps which are not perfect enough, but judging from the overall development trend of science and technology, LED lamps will definitely be the mainstream in the future. Maybe you want to know more about LEDs in cars, you can visit or It will have some good idea
Add Splendour to Your Interiors with Track Ceiling Lights
The art of drawing the eyes upwards is done by mixing and matching a set of light fixtures that work well with the ceiling and the accommodation space. It can be challenging to make a living space look convivial and spacious.Artistic elegance can be achieved with track lighting, these are especially useful when the room is less spaced out and you need maximum light to illuminate all the corners. The wonder of this fixture is that it needs only a single ceiling installation for lighting up the whole space. Surprisingly, this illuminating fixture takes up less space on the ceiling; you can even create mood and spotlighting. From brightening a badly lit corner or focusing on the entryway these lights have everything covered. It might be a bit overwhelming to have the constant glare of the spotlights overhead; use muted colored bulbs if you are not a fan of bright lights. To make the decor setup look eye-catchy hang pendant lamps from the track this will make them an attractive statement piece for any living space. This trend has made a comeback from the 80s and its here to last, so if you have been contemplating to go full retro in some of your existing rooms this is the ideal choice. Renters and DIY experts swear by these modern ceiling lights, the trend since it requires less effort to fix and function. You can end up wiring an entire unit without disturbing the interior theme, opening up walls and adding new wires in the ceilings. Easily add or subtract the number of lamp heads you need in one track unit. You can install three or more than three lamp heads on a single track lighting system. It conveniently saves space and can be installed on slanting walls too.It is an alternative solution to having large floor lamps that take up room and chandeliers that can hit your head if you have a low roof. Can be camouflaged with the ceiling color and also made invisible with a floating design technique. A newer version is available known as the monorail, it comes with a flexible, low-voltage, chic look that can be a little over the budget. Adding contrast with mixed and matched lamp heads will make the track lighting fixture a head-turning statement piece in a small space. You will not need any other wall fixture to highlight.Now adorn your bare ceiling with LNC Homes stunning track lighting, these come with adjustable lamp heads. Your rustic exposed wood beams in the kitchen will get a facelift with these lights. The sleek industrial finish can fit one as well as three lamp heads at a time. Ideal for man caves, screened porch, hallways, and home library. If you are looking to re-decorate your home with minimalist, industrial and contemporary style then track lighting creates a specific mood for any spot of the space. They also illuminate the voids and blank spaces giving them an in-depth decor character. Order now RELATED QUESTION What is proffesional led stage lighting? When you're putting on an occasion, whether it is an unassuming school play or a party, stage lighting rental is an unquestionable requirement. Lighting is a main thrust of your production, giving brightening, center, detail and modifying the view of the group of audience. There is nothing that so vitally passes on an inclination superior to a decent lighting system, and with boundless inventive potential, will serve as an immense advantage for your creation. Focus, position and hanging: Conventional stage lighting must be set up because of these three contemplations. Focus refers to where the light will point; position alludes to where the light will start from; hanging refers to the real demonstration of hanging the light. Shading, force and example (assuming any) should be considered next. Types of stage lighting : Ellipsoidal - these lights are the conventional stage lights and thought to be the most critical. They are centering lights, the appearance in front of an audience of which can be adjusted by screens and channels. Fresnel - these lights are utilized for shading washes on the stage. Standard Jars - these lights are the sort you will see in even the dingiest of bars. Continuously a strong choice, standard jars can get hammered, are sturdy and simple to transport. Follow spots - these are spotlights used to pursue somebody around a phase. Obviously, there are increasingly choices accessible for stage lighting with the consistent progress of innovation. Presently you have the fundamentals; here are a couple of more alternatives: LEDs - these Professional LED Stage Lighting are useful for centered pillars and have been gradually supplanting conventional globules in stage lighting. Dizzies - these lights are round circles with a few Drove lights (more often than not of varying hues) covering the surface. The circle pivots in an assortment of bearings and examples, making a whirling, confounding example, consequently the name. Gels - this term alludes to the hues given to lights. They function as shading channels, and should work in congruity with the shade of the light itself to accomplish the craved impact. Once you have got your types of lighting down, you'll have to consider where to place them. Here's an essential summary of lighting positions: Front - This is utilized for the most part for perceivability and shading impacts. Side - can be utilized to awesome impact to complement activity. Back - Additionally utilized for impact. This kind of lighting can make the dream of profundity on a phase, or notwithstanding to silhouette a man totally.
How Do You Like Better Edward Cullen,Jasper Cullen , Emmett Cullen, Or Jacob Black?
omg i luv twilight i LOVE Edward— — — — — —Sylvester JasperSylvester Jasper (born 13 September 2001) is an English professional footballer who plays as a forward for Fulham— — — — — —What fun summer activity can you do in Jasper, Alberta?We love Jasper. We actually travel by motorhome and stay at the Whistlers Campground. Elk all over the place. The town of Jasper is great to visit. Shops and great restaurants (one great pizza palor I forgot the name but on the main street downtown). Take a tram up the mountainside or visit the rodeo which is usually in town in the summer. Depending on how long you stay, you might want to drive down the Icefields Parkway to Lake Louise. This is the most beautiful Lake we have ever seen with glaciers feeding into it. Have fun, we are going back next summer. Janet— — — — — —Matthew JasperMatthew Jasper (born 12 September 1972) is a British short track speed skater. He competed at the 1992 Winter Olympics and the 1998 Winter Olympics.— — — — — —Jasper and Rosalie Hale? Where In Twilight?Not sure what page, but in chapter 8 or 9. I am pretty positive with it— — — — — —Jasper WestJasper West was a provincial electoral district in Alberta, Canada, mandated to return a single member to the Legislative Assembly of Alberta using the first past the post method of voting from 1959 to 1963.— — — — — —Have you ever been to Jasper,Ark ?It's about 100 miles southeast of Bentonville. I do not know much about it, I think I've been there once or twice. It's certainly a small town, very rural. It's a beautiful place though. The Buffalo river is near there and it's a blast to canoe it— — — — — —What style of art does Jasper Johns do?Jasper Johns was an 'American Pop' artist. His aim was to draw our attention to and celebrate common objects. He called these things "seen but not looked at. " Among them, were his Targets as you mentioned, but also flags, numbers, and alphabets. These are everyday objects often seen but rarely analyzed. Beyond the style, his technique would be called Encaustic. This is a technique of painting with wax— — — — — —who's better Jasper Hale or Edward Cullen?Jasper WHITLOCK Hale is better of course. He tried to kill Bella. This should prove his superiority. Plus he's one of the only decent characters in a crap series. The others being Rosalie and Tyler's van— — — — — —What color flowers would go well with this Jasper colored bridesmaid?That's a beautiful dress! I would say cream colored roses with pink tips (so they are not too white like the brides bouquet). Looking at the flowers in the picture, you can see a light pink flower might work too, but I am kind of iffy on that— — — — — —How come suddenly everyone has a grandparent or relative named Rosalie, Jasper, etc to name their kid after?My grandparents are Alan and Leonie and Leslie and Judith "Judy" I have loved the name Jasper for years, well before all this Twilight bullsh!t. And if I have another son one day I might just use it. I really could not give two hoots about some character to be honest.— — — — — —Jasper, Indiana, micropolitan areaThe Jasper micropolitan statistical area, as defined by the United States Census Bureau, is an area consisting of two counties in southwestern Indiana, anchored by the city of Jasper. At the 2010 census, the Micropolitan area (SA) had a population of 54,734 up from a population of 52,511 in the 2000 census. The micropolitan area covers an area of 776 sq mi (2,010 km2).— — — — — —how can jasper CHALCEDONYS have a hardness of over 9.5 on mohs scale?It does not , it has a hardness between 6— — — — — —Rosalie and Jasper in Twilight....?Rosalie and Jasper are twins. Esme is supposed to be their aunt. and if they were Cullen it be like they were dating their siblings even though they are all "adopted"— — — — — —Help me find a picture of Jasper Hale (Twilight)?Why r u all so stuck on that movie?— — — — — —West Jasper Place, Edmonton (area)West Jasper Place is a residential area in the west portion of the City of Edmonton in Alberta, Canada. It was established in 1972 through Edmonton City Council's adoption of West Jasper Place Outline Plan, which guides the overall development of the area.
Null
(source: OFweek)With the popularity of computers, mobile phones, digital cameras and other electronic products, there are more and more applications of data transmission and fast charging between electronic devices through interconnection, which makes USB type-C and quick charge (QC) become a new trend of market development. The goal of USB type-C interface is to adopt a unified interface for the interconnection between different electronic devices. At the same time, it can provide power supply and transmit data, and also support audio and video and customer personalized communication protocols. Quick charge reduces the loss on the cable and connector by increasing the output voltage to increase the output power, and sets the output voltage through different states of USB signal lines D , D -.Therefore, in order to meet the two standards of USB type-C and quick charge, we need a power controller that can adjust the voltage according to the requirements of electric equipment. Ansenmey semiconductor's single inductor H-bridge voltage rise and fall power controller ncp81239 is a very ideal choice. It can adapt to a wide input voltage range and a wide output voltage range. The integrated I2C interface of the chip can cooperate with the external microcontroller (MCU) to adjust the output voltage step by step, and can realize a variety of fast charging protocols on the same type-C port. It can also connect with apple lighting interface fast charging protocol, Samsung interface fast charging protocol, etc.Ncp81239 supports a wide input voltage range, provides dynamically programmable switching frequency from 150kHz to 1.2MHz, integrates four MOSFET drives, adopts double edge current mode control, supports output pre bias start, adaptive dead time control to prevent through, has independent input and output current detection, and the output voltage (range 0 to 20V) can be programmed through I2C, integrates overvoltage, undervoltage Perfect protection functions such as overcurrent and accurate overload protection, as well as protection of 5V vconn power supply.Ncp81239 adopts double edge current mode voltage rise and fall control, which can realize seamless switching from step-down mode to step-up mode. I2C interface only uses two signal lines to realize two-way serial communication. The connection of open drain can easily interface between different logic levels, and is compatible with MCU of 1.8V, 2.5V, 3.3V and 5V logic levels.The input and output current can be detected through the detection resistance on the high side. The detected voltage is divided into internal and external channels: the internal current signal is used for loop control and current limiting protection of current mode, the overcurrent protection can be set or shielded through the internal register, the internal fixed gain is 10 times, and the internal current value is stored in the corresponding register through analog-to-digital converter (ADC), It can be read through I2C; The external current signal can be read by MCU to perform corresponding software operation. The external impedance can set the current measurement range. The transconductance of the current detection operational amplifier is 5ms. The external resistance capacitor can also be connected to filter the current signal into an average value.Ncp81239 has a built-in 4-channel 7-bit ADC, which can realize a / D conversion between input and output, and the corresponding value can be read by reading the internal register through I2C. The internal feedback reference voltage is set through a 9-bit DAC, the reference voltage range is 0V to 2.55V, and the output voltage range can be set through the external voltage dividing network at the same time. Because the internal step size has 9-bit ADC and the step size is relatively small, it is convenient to set the compensation cable voltage drop with MCU I2C interface, so that the load terminal voltage can be maintained within the error range of the set value. It is very suitable for occasions requiring voltage regulation such as qc3.0 or USB PD.Under USB PD, qc2.0, qc3.0 and other specifications, if the output voltage needs to be dynamically set, the voltage regulation rate will be involved. If the voltage regulation speed is too fast, it will lead to inductance current overshoot, output voltage overshoot or undershoot. Ncp81239 built-in register can be set through I2C interface to control the slope of voltage rise and fall during voltage regulation.When the output voltage is higher than 110% of the set value for more than one switching cycle, ncp81239 will enter the overvoltage protection mode. During overvoltage protection, S1 is turned off, S2 is turned on, S3 and S4 will be turned on alternately to discharge the output voltage and prevent the reverse current from exceeding the set reverse protection current value. In case of output overvoltage fault, the switching frequency will be reduced to 50KHz to prevent inductance saturation and reduce the power consumption on the power tube.The traditional synchronous rectifier control starts when the output has a pre bias voltage, and the output will discharge first and then rise. When the output is pre biased, ncp81239 will work in asynchronous rectification mode at startup and will not discharge the output. It is suitable for battery load. The output voltage is within / - 5% of the set value, and the power good signal will be sent after a delay of 3.3ms. If the output voltage exceeds / - 7% of the set value for more than one switching cycle, the power good register resets and outputs an interrupt signal.Ncp81239 supports four I2C addresses, which can be configured before the chip leaves the factory according to the needs of customers. The I2C address of the default model is e8h / e9h. In addition, ncp81239 has overheating protection. If the chip junction temperature exceeds 150 degrees, it will turn off four external switches and restart when the temperature drops to 125 degrees.
Introduction to Ifx007t High Current Half Bridge Motor Driver
Infineon's ifx007t is an integrated high current half bridge motor driver and is an industrial and multi-purpose novalithic ™ Part of the series, including a p-channel high side MOSFET and an n-channel low side MOSFET and integrated driver in the same package. Since the p-channel high side switch does not need a charging pump, EMI is minimized; Because the integrated driver IC has logic level input, current detection and diagnosis, conversion rate adjustment, dead time generation and protection against overtemperature, undervoltage, overcurrent and short circuit, the interface with MCU becomes easy, providing a cost optimization solution with very small board space for protecting high current PWM motor drive. The maximum path resistance at @ 25 ℃ is 12.8 m Ω, The maximum of high side is 6.5 m Ω, the maximum of low side is 6.3 m Ω, the current limiting level is 55A, with latch characteristics and undervoltage shutdown characteristics, the working voltage is up to 40V, jesd47i qualification, ifx007t and other ifx007t form H-bridge or other 3-phase drive configuration, which is mainly used in motor drive. This paper introduces the main characteristics, block diagram and application circuit of ifx007t, as well as the main characteristics of ifx007t motor control board, Arduino motor control circuit diagram and PCB layout.The IFX007T is an integrated high current half bridge for motor drive applications. It is part of the Industrial &Multi PurposeNovalithIC ™ family containing one p-channel high-side MOSFET and one n-channel low-sideMOSFET with an integrated driver IC in one package. Due to the p-channel high-side switch the need for acharge pump is eliminated thus minimizing EMI. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, deadtime generation and protection against overtemperature, undervoltage, overcurrent and short circuit.The IFX007T provides a cost optimized solution for protected high current PWM motor drives with very lowboard space consumption.The IFX007T is part of the Industrial &Multi PurposeNovalithIC ™ family containing three separate chips in onepackage: One p-channel high-side MOSFET and one n-channel low-side MOSFET together with a driver IC,forming an integrated high current half-bridge. All three chips are mounted on one common lead frame, using the chip-on chip and chip-by-chip technology. The power switches utilize vertical MOS technologies to ensureoptimum on state resistance. Due to the p-channel high-side switch the need for a charge pump is eliminatedthus minimizing EMI. Interfacing to a microcontroller is made easy by the integrated driver IC which featureslogic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protectionagainst overtemperature, undervoltage, overcurrent and short circuit. The IFX007T can be combined withother IFX007Ts to form a H-bridge or a3-phase drive configuration.Main features of ifx007t:• Path resistance of max. 12.8 mΩ @ 25℃ (typ. 10.0 mΩ @ 25℃)High side: max. 6.5 mΩ @ 25℃ (typ. 5.3 mΩ @ 25℃)Low side: max. 6.3 mΩ @ 25℃ (typ. 4.7mΩ @ 25℃)• Enhanced switching speed for reduced switching losses• Capable for high PWM frequency combined with active freewheeling• Switched mode current limitation for reduced power dissipation in overcurrent• Current limitation level of 55 A min.• Status flag diagnosis with current sense capability• Overtemperature shutdown with latch behavior• Undervoltage shutdown• Driver circuit with logic level inputs• Adjustable slew rates for optimized EMI• Operation up to 40 V• Green Product (RoHS compliant)• JESD47I QualifiedFigure 1. Block diagram of ifx007tFigure 2. Ifx007t application circuit: two ifx007ts form an H-bridgeFigure 3. Ifx007t application circuit: half bridge composed of ifx007t (load grounding)Ifx007t motor control boardThe Motor Control Shield adds powerful motor control to the Arduino projects. The shield can be controlledwith the general logic IO-Ports of a microcontroller. Either an Arduino Uno or the XMC1100 Boot Kit fromInfineon can be used as the master.On board of the Motor Control Shield are three IFX007T NovalithICTM. Each is featuring one P-channel hig h sideMOSFET and one N-channel low side MOSFET with an integrated driver IC in one package. Due to the P-channelhigh side switch a charge pump is not needed.The IFX007T half-bridge is easy to control by applying logic level signals to the IN and INH pin. When applying aPWM to the IN pin the current provided to the motor can be controlled with the duty cycle of the PWM. With anexternal resistor connected between the SR pin and GND the slew rate of the power switches can be adjusted.The Motor Control Sh ield can be easily connected to any Arduino board or the XMC1100 Boot Kit via headers.The application targeted by the IFX007T devices is brushed DC/brushless DC Motor Control. Besides MotorControl any other inductive, resistive and capacitive load within the electrical characteristics of the NovalithIC ™ can be driven by the IFX007T. In the Motor Control Shield three IFX007T are used. Each is capable of driving up to 55 A. The limited thermal performance of the Shield PCB limits the recommended maximum current to 30 A.Figure 4. Outline drawing of ifx007t motor control boardMain features of ifx007t motor control board:• An Arduino Uno, XMC1100 Boot Kit, or similar board connected to the shield can control the three halfbridgesvia the general IO pins.• Brushed DC Motor Control up to 250 W continuous load- 8 – 24 V nominal input voltage (max. 6 – 40 V)- Average motor current 30 A restricted due to the limited power dissipation of the PCB (IFX007T currentlimitation @ 55 A min.)• Drives either one brush/less DC motor, one brushed bi-directional DC motor or three uni-directional DCmotors.• Capable of high frequency PWM, e.g. 25 kHz• Adjustable slew rates for optimized EMI by changing external resistor• Driver circuit with logic level inputs• Status flag diagnosis with current sense capability• Protection e.g. against overtemperature and overcurrent• Reverse polarity protection with IPD90P04P4L• Further comments:- Due to limited performance caused by the PCB layout, we recommend our customers to remove thecapacitance C5 for high frequency applications. It is only layout related, not refer to the device.- The size of the DC-link capacity (C4 in schematic) with 560 μ F is for most applications sufficient. But forhigh current applications, we recommend our customers to follow the design rule in our applicationnote and replace the DC-link cap with a bigger one.- Due to the limited area of the PCB and the small DC-link cap, the demoboard shouldn ’t be used forshort circuit test.- This demoboard is designed for both sensorless applications and the application with Hall sensor. Butfor the application with sensor, please remove R36/R37/R38 and solderR18/R19/R20/R21/R22/R23/R25/R26/R27.- Due to the limited pinout of the Arduino shield all IS pins of the three devices are connected together.According to different applications the value of R4 could be adjusted to achieve a better current senseperformance.Figure 5. Control circuit diagram of Arduino motor using ifx007tFigure 6. PCB layout of Arduino motor control board using ifx007tFigure 7. Motor control board connectorFor details, see:https://www.infineon.com/dgdl/Infineon-IFX007T-DS-v01_ 00-EN.pdf? fileId=5546d46265f064ff0166433484070b75and https://www.infineon.com/dgdl/Infineon-Motor_ Control_ Shield_ with_ IFX007T_ for_ Arduino-UM-UM-v01_ 00-EN.pdf? fileId=5546d462694c98b401696d2026783556Infineon-IFX007T-DS-v01_ 00-EN.pdfInfineon-Motor_ Control_ Shield_ with_ IFX007T_ for_ Arduino-UM-UM-v01_ 00-EN.pdf
Outfit Ideas Please! 10 Pts.?
Outfit ideas please! 10 pts.?wear the plaid tunic with black leggings and wear the knee high boots. pair it with a cute hairsyle, and lots of accessories. and your set (:— — — — — —Winter formal (really a formal valentines dance) what to wear?I wore a red tunic (a red shirt if you dont have a red tunic) with white shorts with black leggings with black flats— — — — — —what to wear with black leggings?First of all, leggings are only for girls.Are not you a boy? Anyways, my guess is (any color) baby dress about lower than the knees length and boots will look good with it.— — — — — —Could I wear shorts with black leggings?Sure short shorts.go for it— — — — — —Is it okay to wear leggings under shorts??i've seen fashion models looking beaut with leggings under shorts. they will look good if you wear them nicely. and, i would think black leggings with denim blue/black shorts will look great. and maybe a long necklace. :).— — — — — —Have you seen any interesting costumes today?Pacman. They were in a big dome from the waist up with their arms inside it and black leggings. BQ: I am a tardis BQ2: nope, I am handing out all the ones I do not want to keep though.— — — — — —Help with my fashion sense. lol?I would say black leggings and low converse with a leather / distressed denim / grungy checked jacket would look good without being too much of a drastic change. you could also dye your hair darker (though I wouldnt reccomend black, I would say a Dark Ash Brown - HOT colour) and wear a little eyliner but not too much. You probably dont want to lose the whole girly side of you so maybe go with bright nail polish at the same time and you wo not look like youve gone completely dark and bad - remember you want people to take you seriously! Also, maybe do not be so bubbly all the time, try and be a little more serious/mysterious but you do not need to start mouthing off and misbehaving to achieve a different look! Hope this helped ;D— — — — — —what can i wear with black leggings?White tights and black Tee shirt— — — — — —Is wearing black leggings to go running weird?Wear whatever the hell you want. People are not gonna be like "Look at what shes wearing omg". Have you ever asked yourself this "Do i go running to impress people or because I want to legit run" Just dont worry about this shiit wear whatever— — — — — —I need cute layering ideas! Can someone help me?This is a fashion emergency! XD?Ok I would layer the baby blue tank, the black tank and the grey tank, I would wear the grey one on top, then the blue one, then the black one, and I would wear them with shorts and black leggings underneath it would look awesome! Hope this helps!— — — — — —I have black leggings, and light green dress, and others posted, what should I put together for tomorrow?Because its summer, only where the the black ballet flats if you have black in the outfit. If you have silver flats, wear them with the green and silver dress. Depending on the color of you tees, wear a tee with jeans and your pink keds. Ideally a pink or green tee with brown pants.— — — — — —Where can i find a cheap pair of black leggings?Take a look at Twenga or Ciao they have great deals!— — — — — —do you think that black uggs black leggings and a denim mini skirt woukd look ok?I think that would look awful, but then again, Ugg boots are the epitome of horrid fashion— — — — — —do brown boots match with long black leggings?yes it does! Its all the rave in some places like schools with color dress codes— — — — — —Girls can you help me put an outfit together the main accessorie is my brown uggs...?Black leggings loose fitted dress bolero scarf— — — — — —50 points best answer. what should i wear with this caridgan?I think it would look great several ways. For a girly or more sophisticated look you could pair it with a dress. A darker color like black or heathered grey if you are going for sophisticated and a pastel for a feminine look. A floral dress would also look good with it. Accessorize with long layered pearls and chains, pearl earrings and ballet flats. Hair up in a sleek pony tail would show of the details of the cardigan. For a casual look a great pair of cuffed distressed jeans with flats and a bright color cami underneath. Accessorize with chunky bracelets and matching earrings. For an edgy look wear with black leggings or skinny jeans, black pumps and a grey shirt underneath (if the cardigan fits right you could wear it buttoned alone.but I find most cardigans are not flattering that way). A big ring and earrings would look good, or skip the earrings and do a headband with a large bow to add a hint of femininityy. Also try a skinny belt to cinch the waist. I personally think a cardigan like this a great staple for any girl's wardrobe.
Black Friday Is Red Hot Day
PETALING JAYA: Less than two weeks after splurging on the 11.11 Singles’ Day sales, Malaysians had another reason to scour online for more deals and discounts – Black Friday sales.The Black Friday shopping spree is a long-observed tradition in the United States, celebrated a day after the Thanksgiving holiday where retailers slash prices on items online and in store. Many e-commerce sites, among them Lazada, 11street and Shopee, played on the ease of online shopping by offering up to 85% off selected items on their shopping platforms for Black Friday.“In 2017, we saw a rise in gross merchandise value of up to 50% for Black Friday in comparison to a regular Friday. “The highest performing product category for the day was electronics, followed closely by fashion, and health & beauty,” said 11street chief operating officer Jenny Tay. “These days, we are seeing great traction with our customers, especially for purchases of mobile top-up vouchers and travel deals due to the upcoming year-end holiday season. “We do foresee that the hype around Black Friday might not be as significant as 11.11.” Student Ariesya Roslan, 21, got her hands on makeup, in particular a concealer usually priced at RM126 but marked down to RM89 on Black Friday. PR manager Ethan Wong stocked up on his Calvin Klein underwear and protein shake.Freelance writer KL Lee, 30, said he bought some games on Steam, PlayStation store and also a book from the Book Depository. “Samsung also started its Blue Week sale on the same day as Black Friday, and I managed to get a Samsung Galaxy Note FE for RM1,446.90 which is about RM630 cheaper than its original price,” he said. There were those who refrained from purchasing anything during the Black Friday sales after having hit their “shopping quota” during the 11.11 sales event. “I will not be spending any money on Black Friday as I just bought a new smartphone during the 11.11 sales event,” said graphic designer Emily Yeoh, 27. Writer Maria Fernandez said in jest “I only have RM50 left in my life” after splurging on makeup and clothing during the earlier sales.For the 11.11 sales, Shopee recorded more than 11 million orders in just 24 hours, with over 42 million total visits. It claimed that, at one point, it sold over 58,000 items in just one minute. Most of Lazada’s buyers on 11.11 were from Selangor, Kuala Lumpur, Johor, Penang, and Perak who bought 27 tonnes of Milo in the first two hours and more than 4.5 million pieces of diapers.
Free FREE White Pages Website?
yes i will give one free sub domain of my website .1. How can I find my husband,I want a divorce,I do not know his address at all. The white pages r not helping?you do not need to find him. Go to your city hall and file for divorce. I believe that after a year if there is no response the court will grant your divorce. Every state has different laws2. Why canu2019t I read properly if a book has white pages, but I can read if a book has yellowish pages (eg: aged books)?Helen Irlen noticed and studied this phenomenon and wrote a book, Reading by the Colors. While, as the mother of two children with dyslexia problems, I am not convinced that as many people are helped by her methodology as she claims, there are definitely people who are enormously helped by either tinted glasses or simply putting a colored plastic sheet over the pages that they are reading. That is a really inexpensive fix to what can be a significant problem. I strongly recommend that you experiment with different colors. Good luck.Why can't I read properly if a book has white pages, but I can read if a book has yellowish pages (eg: aged books)?3. When printer ink says it yields 190 black pages, does it mean white pages with black typing?Yes it would be 190 pages with black text on them. Please bear in mind that when page yields are calculated it is done with a 5% page coverage which is the equivalent of a very light letter. As such if you are printing pages from your textbook I would anticipate you getting much less than 190 pages.4. do apps on smartphones use data? apps like yellow book or white pages? or just in general.?Yes. Apps like that do5. How do the White Pages find out your addres and phone number?By doing a computer search of all phone records and email addresses Jes***6. Does anyone know where is the Chinatown in Houston,TX?Whom you want to meet there? Search out YELLOW PAGES or White Pages.... moreover ... google earth can be helpful too7. how can I find someone who doesn't show up in white pages?call the college. They have to tell you (since you are his parent) I hope you find your son!8. can i solicit in the white pages?It would be like sending a flyer to every post office box in your town. Unless you know the people you are calling will be interested in what you are selling, it's going to be a huge waste of time and money. Agree with advice about "Do Not Call" list. Get the most up to date list you can, both federal and state, and make sure you do not call any of these people. Besides, what you are doing is starting a business. You are going to need licenses, tax numbers and whatever permits your local area requires for telemarketing. Do not forget to write up your business plan! It might cost you more to do this than you will get in return, so you would not be making money.9. How can I access residential white pages in another state?dial 1-your area code of the state/town you want the white pages for and 555-1212, and the operator will ask you for the name of the person you are looking for for instance if I wanted someone in seattle I would dial 1-206-555121210. Initials in white pages?it someone else with the initials G A B11. Why don't phone companies publish white pages anymore?I work for a major Telephone Company... and while we still print a limited amount of white pages, the culture and technology we live in uses resources found via the World Wide Web. Your also talking about the cost associated behind the material, printing and distribution. Those costs can be passed on to you, the consumer then, which is not a good thing! Hope this helps!12. Where can I find a web site that will give me FREE white pages,that does not want money to get numbers?Try these. whitepages.com switchboard.com They also have reverse listings. .
Red Hot Chilli Pipers
Red Hot Chilli PipersRed Hot Chilli Pipers are a Celtic rock band from Scotland. Formed in 2002, they became popular internationally in 2007 after winning the BBC talent show When Will I Be Famous? The band's lineup features three highland bagpipers and traditional marching snare, backed by a five- to seven-piece band. The band's live show also features vocal performances and highland dancing.— — — — — —Red Hot TV (Canadian TV channel)Red Hot TV is a Canadian English language Category B specialty channel that broadcasts adult entertainment material, primarily consisting of pornographic films, with a focus on couples-oriented programming sourced from various adult film studios including original Canadian content. The channel is owned by Ten Broadcasting, a company owned by Stuart Duncan (80.01%) and LFP Video Inc. (19.9%)— — — — — —Red Hot & Blue (Lee Atwater recording project)Red Hot & Blue was a recording project from Lee Atwater, a Republican political consultant in the United States. The album was released in 1990, and featured over a dozen rhythm and blues performers, including: Chuck Jackson Carla Thomas B.B. King Isaac Hayes Sam Moore Bobby Jones Michael Toles The Memphis Horns Bob Babbitt Billy Preston Terry McMillan Rod Smarr— — — — — —Red Hot RomanceRed Hot Romance is a 1922 American silent comedy film directed by Victor Fleming. A fragmentary print survives in the Library of Congress.— — — — — —They're Red Hot"They are Red Hot" is a song written and performed by Delta blues musician Robert Johnson. The song was recorded on November 27, 1936, in an improvised studio in San Antonio, Texas, and released on a 78 rpm record by Vocalion Records and ARC Records and released in July of 1937. Music historian Ted Gioia describes "They are Red Hot" as: [one] of his best dance numbers ... evoking the pitches of street vendors, [a] look backward to the world of medicine shows and itinerant merchants ... This is the most lighthearted interlude in all of Johnson's oeuvre, opening up a different perspective on this supposedly devil-haunted soul.— — — — — —Red Hot RhythmRed Hot Rhythm (1929) is an American pre-Code early sound musical film directed by Leo McCarey, and starring Alan Hale Sr., Kathryn Crawford, Walter O'Keefe, and Josephine Dunn. As originally released by Path Exchange, the film featured sequences in Multicolor. However the whole film was considered a lost film, except one number in color, the title song that survives.— — — — — —Offbeat: A Red Hot SoundtripOffbeat: A Red Hot Soundtrip is a compilation album from the Red Hot AIDS Benefit Series produced by Paul Heck. It combines elements of ambient, spoken word, and trip hop to expand the ideas of artistic collage and spiritual transcendence of "the Beats". The album is an offshoot of a larger project called The Beat Experience, which explored the legacy of the Beat movement.— — — — — —My Red Hot Car"My Red Hot Car" is a single by Squarepusher, released in 2001 on Warp Records. The lead track on the single is "My Red Hot Car (Girl)", which leaves the pop music aspects of the song intact. An extended version of "My Red Hot Car" is featured on the album Go Plastic. My Red Hot Car is notable for two different hidden tracks, based on format: the CD version features an ambient piece after 23 minutes of silence, while the vinyl features a percussion-less version of "I Wish You Obelisk" presented behind a silent, locked groove, meaning the needle must be lifted halfway through the second side and placed after the locked groove in order to hear it. The single was selected as NME's Single of the Week in its week of release.— — — — — —Under the Covers: Essential Red Hot Chili PeppersUnder the Covers: Essential Red Hot Chili Peppers is a compilation album released on March 31, 1998 by the Red Hot Chili Peppers. All of the songs featured are covers mainly from the band's early albums. The album actually contains 13 tracks even though only ten are listed on the album's back cover. The album was a limited edition release.— — — — — —By the Way (Red Hot Chili Peppers song)"By the Way" is a song by American funk rock band Red Hot Chili Peppers. It's the title track and first single released from the band's eighth studio album of the same name. The song was the band's sixth number 1 hit on the Modern Rock Tracks chart, staying at the summit for 14 weeks, tying it with "Dani California" as the band's second-longest stay at the top, behind only "Scar Tissue," which was at the top for 16 weeks. It also spent seven weeks at number 1 on the Mainstream Rock Tracks chart, the band's fourth song to top this chart. The song also reached number 2 in the UK, becoming the band's highest-peaking single there alongside "Dani California," and peaked atop the Italian chart. Regarding its release, guitarist John Frusciante noted: "It was not really our decision to put that song out first, but our managers thought it was an exciting song and their enthusiasm convinced us. I guess they thought that it combined the wild part of our sound with the melodic part of our sound." Vocalist Anthony Kiedis elaborated: "I thought that single was an ber-bombastic assault of non-commercialism. For it to be so well-received [in the United Kingdom] was shocking to me, but thrilling at the same time."
沒有數據
  • E-MAIL: angelaliu@aofei-stone.com
  • PHONE : +86 13859989513
  • WHATSAPP : 13859989513
  • ADD : rm No.29e Zhongxinhuiyang Building No.55 North Hubin Road Xiamen China
AOFEI BUILDING MATERIALS
  • Xiamen Aofei Building Materials Co., Ltd. is adhering to the spirit and attitude of serving customers' needs and is willing to offer quality products and services to friends all over the world.
Copyright © 2021 Xiamen Aofei Building Materials Co.,Ltd.  | Sitemap